Light steel villa insulation materials tell you how to prevent cracks in light steel keels?


Release time:

2024-04-18

Before new workers operate the project, strengthen on-the-job employee training for the operators and enhance the sense of responsibility of the company's workers. Before carrying out the ceiling lifting process, the constructor must conduct technical exchanges with the operating workers, and the explanation must be detailed and in place. The construction workers must carefully inspect and do a good job in continuous monitoring of key special processes in the development of construction projects. Our workers did not promptly rectify the keels and gypsum boards installed that did not meet social standards.

Light steel keels and gypsum boards have been used as ceiling engineering materials due to their good flame retardancy, sound insulation and ease of on-site construction. However, cracks are a common quality problem in light steel keel gypsum board ceiling projects. Cracks in different parts will seriously affect the visual effect of the ceiling.

1. To ensure that the gypsum board is fixed to a stress-free state. Place the wire before installing the boom, and make sure the boom is vertically stretched during installation. When installing the light steel keel, connect the main keel to the lower boom with a hanging piece, tighten the screws and secure it, and use plug-ins to connect the main keel extension. The auxiliary keels for fixing the gypsum board should be flat and without convex edges to prevent the board from being fixed under flexural stress.
2. Before new workers operate the project, strengthen on-the-job employee training for the operators and enhance the sense of responsibility of the company's workers. Before carrying out the ceiling lifting process, the constructor must conduct technical exchanges with the operating workers, and the explanation must be detailed and in place. The construction workers must carefully inspect and do a good job in continuous monitoring of key special processes in the development of construction projects. Our workers did not promptly rectify the keels and gypsum boards installed that did not meet social standards.

3. Pay attention to the overall putty and do not make the putty too thick. Putty used in batches cannot fill the joints, it should be divided into 2 to 3 times with filling paste. If the putty stick is fully wet in batches, it will be difficult for the putty to dry in a short time, and it is easy to cause depression or hollowing afterwards, causing cracks and dark cracks. Also note that plywood and gypsum boards such as the external corners of brick walls are prone to cracking at processing sites due to shrinkage.

Latest News

Export standard moisture-proof paper packaging 16mm PU metal siding panel

Export standard moisture-proof paper packaging 16mm PU metal siding panel

2026-02-03

Milky white seven bricks 16mm PU metal siding panel for external wall decoration

Milky white seven bricks 16mm PU metal siding panel for external wall decoration

2026-02-01

Light steel frame structure can be quickly assembled on site and shipped to the customer's construction site

Light steel frame structure can be quickly assembled on site and shipped to the customer's construction site

2026-01-30

Ancient wall gray six bricks 16mm PU metal siding panel for external wall decoration

Ancient wall gray six bricks 16mm PU metal siding panel for external wall decoration

2026-01-29

Milky white long strip stone 16mm PU metal siding panel for external wall decoration

Milky white long strip stone 16mm PU metal siding panel for external wall decoration

2026-01-28

Ancient wall gray long strip stone 16mm PU metal siding panel for external wall decoration

Ancient wall gray long strip stone 16mm PU metal siding panel for external wall decoration

2026-01-27